1ST-SYN2 · Synapse Data Center Linear · 2-Foot

2ft Synapse LED Data Center Fixture

Engineered specifically for Data Centers and their challenges.

SKU 1ST-SYN2 Category

Certifications

The work surface in a data center is the vertical face of the server cabinet, not the floor. The 2ft Synapse uses an angled LED tray that throws peak candela outward toward the rack face, targeting 40 to 50 vertical footcandles across the work zone, in the compact length that fits hot aisle and cold aisle containment and short cabinet runs. FCC Part 15 Class B drivers hold emissions 6 to 10 dB tighter than the Class A drivers in most commercial fixtures, protecting high-speed transceivers from interference. Two rear access plates allow power to be carried through to the next fixture without removing the LBAT acrylic lens. At 21W delivering approximately 3,750 lumens at 178 lm/W, the Synapse holds down both direct draw and secondary cooling load.

Ideal Applications

  • Hot Aisle and Cold Aisle Containment Zones
  • AI and HPC Server Halls (White Space)
  • Data Center Electrical and UPS Rooms
  • Colocation Facilities
  • Network and Distribution Rooms
  • Federal and DoD Data Centers (BAA/BABA Compliant)
21

Watts

3,750

Lumens

3500/4000/5000

Kelvin

Damp Rated

Ingress

Highlights

Engineered for the vertical work surface of the server aisle.

V-Tray Optics

An angled LED tray throws light outward to the rack face for 40 to 50 vertical footcandles, where standard downward fixtures light the floor.

FCC Part 15 Class B

Shielded drivers run 6 to 10 dB tighter than Class A, protecting high-speed network transceivers from lighting-induced interference.

Through-Wiring, Dual Access Plates

Wire and daisy-chain along the cable tray without removing the lens or opening the optical face.

LBAT Acrylic Lens

The frosted LBAT-style lens slides into a side channel for a clean diffused face with no exposed fasteners and 9 to 10% transmission loss.

Vented Aluminum Housing

Passive convective cooling keeps junction temperature low, protecting lumen maintenance and L70 life.

21 Watts / 3,750 Lumens

178 lm/W delivered efficacy minimizes cooling load in thermally constrained server halls.

Versatile Mounting

Cable/chain, pendant, or surface mount adapts to white-space ceiling heights and containment structures, positioning the fixture at the 8 to 10-foot height the V-tray optics are calibrated for.

5-Year Warranty

Driver, LEDs, and housing covered.

Specifications

Built for the server hall, not adapted from a warehouse fixture.

Talk to our sales team to match the right configuration to your application. Contact Us!

Photometrics

Lumen Output

3,750 lm

Efficacy

178 lm/W

CCT Options

3500K, 4000K, 5000K

CRI

80 (90 Available Upon Request)

Optics & Distribution

Angled V-Tray, LBAT Acrylic Lens

L70

>100,000 Hours

Electrical

Wattage

21w

Voltage

Universal (120-277V) – 347/480V Optional

Driver

0-10V Controls Ready Standard and FCC Part 15 Class B EMI Rating

Power Factor

>0.90

THD

< 20%

Surge Protection

6kV minimum

Mechanical

Length

46″

Width

6.3″

Height

3.7″

Weight

5 lbs.

Housing

Vented White Aluminum

Mounting

Chain/Cable, Pendant, Surface

Compliance & Environment

Ingress Rating

Damp Rated

Operating Temp

−40°F to 122°F (−40°C to 50°C)

Certifications

BAA, BABA, CSA Listed, DLC Premium, FCC Part 15 Class B, Made in the USA

Trade Compliance

BAA · BABA

Warranty

5 Years

Lead Time

4-6 Weeks

Resources & Downloads

Spec packages for designers, engineers, and procurement.

Spec’ing a project? Call us at (530) 887-1110

PDF

1ST-SYN2 Specification Sheet

IES

1ST-SYN2 Photometric Files (.IES)

RFA

1ST-SYN2 Revit / BIM Family

PDF

1ST-SYN2 Photometric Report

PDF

1ST-SYN2 Install Guide

PDF

1ST-SYN2 BAA/BABA/TAA Trade Compliance

Designing the install? We'll model it in our software, at no charge.

About Us

Over 10,800 commercial projects since 1993.

Federal agencies · Fortune 500 manufacturers · National retailers · Public infrastructure · National Laboratories · Higher Education